Drip Irrigation Kit with 30m Hose, Adjustable Drippers & Misting Nozzles

Put water at the base of each plant instead of all over the path.

This DIY kit gives you everything to set up a small drip and misting network: 30m of 4/7mm hose (two 15m lengths), 30 adjustable drippers on stems, 20 misting nozzles and the connectors to tie it together.

Once laid out, the system waters every plant along the line at the same time, so beds, pots and garden rows get an even drink with less effort. It can be laid on the surface or under mulch.

It is manually operated – connect it to your tap and turn it on when needed.

• 30m of 4/7mm hose (2 x 15m)
• 30 adjustable drippers with T-connectors and fixed stems
• 20 misting nozzles with flat tees
• Quick connectors and 2-way connector included
• Surface or under-mulch use
• Heavy-duty plastic fittings

Hose: 2 x 15m, 4/7mm
Total hose length: 30m
Material: Heavy-duty plastic
Operation: Manual
Ships from: Australian supplier stock

• Vegetable beds and raised garden beds
• Pots, planters and balcony gardens
• Small to medium gardens
• Watering seedlings with misting nozzles

Drip watering puts water where plants need it, which matters when water is restricted or comes from a tank. A simple drip line keeps your food garden alive with less time and less water.

• 2 x 15m 4/7mm hose
• 3 x Quick connector
• 1 x 2-way connector
• 30 x Adjustable dripper
• 30 x 4/7mm T-connector
• 30 x 4/7mm fixed stem
• 20 x Flat tee
• 20 x Misting nozzle
• 10 x Double hook
• 2 x Plug
• 1 x Thread seal tape

Accessories or items shown in promotional imagery are not included unless listed above.

Check the tap fitting suits your tap before installing; a tap adaptor may be required (not confirmed by the supplier).

Flush the line before fitting drippers, and clean drippers periodically to stop blockages.

Drain and store indoors during freezing weather. Sizes are approximate.